Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 122

MAKING COPIES USING THE BYPASS TRAY In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and other special media. For detailed information on paper that can be loaded in the bypass tray, see the Safety Guide. For precautions when loading paper in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" in the User's Guide. Place the original. Place the original face up in the document feeder tray, or face 1 down on the document glass. Place paper in the bypass tray. Insert the paper with print side face down. However, if the paper type is "Letter Head" or "Pre-Printed", load the paper with the print side face up*. * If "Disabling of Duplex" is enabled in the system settings (administrator), load the paper in the normal way (face up in trays 1 to 5; face down in the bypass tray). 2 When loading paper larger than 8-1/2" x 11"R or A4R, be sure to pull out the bypass tray extension. Pull the bypass tray extension all the way out. If the bypass tray extension is not pulled all the way out, the size of the loaded paper will not be correctly displayed. Color Mode Full Color Exposure Auto 3 1. 2. 8½x11 8½x11 3. 11x17 4. 8½x14 Special Modes Plain 8½x11 2-Sided Copy Output File Quick File Touch the [Paper Select] key. Copy Ratio 100% Original Auto 8½x11 Paper Select Auto 8½x11 Plain 41