Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 339

2 (2) 5 10 15 To Cc Condition Settings AAA AAA BBB BBB 1 Address Review 2 CCC CCC DDD DDD Address Entry Global Address Search EEE EEE GGG GGG FFF FFF HHH HHH Sub Address III III JJJ JJJ Sort Address Frequent Use ABCD EFGHI JKLMN OPQRST UVWXYZ (3), (5) Enter the destination fax number. (1) Touch the [Address Book] key in the base screen. (2) Touch the one-touch key of the desired destination. If the destination is not stored in the address book, enter the fax number with the numeric keys. If the sub-address and passcode are stored in the one-touch key, the following sub-steps are not necessary. Go to step 3. (3) Touch the [Sub Address] key. "/" appears. (4) Enter the sub-address with the numeric keys. (5) Touch the [Sub Address] key. "/" appears. (6) Enter the passcode with the numeric keys. If a passcode has been omitted in the memory box of the other machine, (6) and (7) are not necessary. Press the [BLACK & WHITE START] key ( ). Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan 3 each page one page at a time. When scanning finishes, place the next original and press the [BLACK & WHITE START] key ( ). Repeat until all pages have been scanned and then touch the [Read-End] key. A beep will sound to indicate that scanning is finished. When the relay machine receives the fax, it will automatically transmit the fax to each of the end receiving machines programmed in the memory box. To cancel scanning... Press the [STOP] key ( ) while the original is being scanned. 110