Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 30

TRAY SETTINGS FOR TRAY 3 AND TRAY 4 LOADING PAPER AND CHANGING THE PAPER SIZE Up to 500 sheets of 5-1/2" x 8-1/2"R to 12" x 18" (A5R to A3W) size paper can be loaded in tray 3. Up to 500 sheets of 7-1/4" x 10-1/2"R to 12" x 18" (B5R to A3W) size paper can be loaded in tray 4. For detailed information on the paper that can be loaded, see the specifications in the Safety Guide and "Paper Tray Settings" in the System Settings Guide. Pull out the paper tray. Gently pull the tray out until it stops. To load paper, go to step 3. To load a different size of paper, go 1 to the next step. 2 A B 3 Adjust the guide plates A and B by squeezing their lock levers and sliding them to match the vertical and horizontal dimensions of the paper to be loaded. The guide plates A and B are slidable. Slide each guide plate while squeezing its lock lever. Fan the paper. Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed. Insert the paper into the tray. Load the paper with the print side face up. The stack must not 4 be higher than the indicator line (maximum of 500 sheets). Indicator line 30