Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 114

Original Size Input 2 (1), (2) (3) OK Cancel OK X 17 (2 1/2~17) inch Y 11 (2 1/2~11 5/8) inch Enter the original size. (1) Enter the X (horizontal) dimension of the original. With the [X] key highlighted, enter the X (horizontal) dimension of the original with the keys. When the document glass is used, a number from 2-1/2" to 17" (64 mm to 432 mm) can be entered. When the automatic document feeder is used, a number from 5-1/2" to 17" (140 mm to 432 mm) can be entered. If the horizontal dimension of the original is less than 5-1/2" (140 mm), use the document glass. (2) Enter the Y (vertical) dimension of the original. Touch the [Y] key and enter the Y (vertical) dimension of the original with the keys. When the document glass is used, a number from 2-1/2" to 11-5/8" (64 mm to 297 mm) can be entered. When the automatic document feeder is used, a number from 5-1/8" to 11-5/8" (131 mm to 297 mm) can be entered. If the vertical dimension of the original is less than 5-1/8" (131 mm), use the document glass. (3) Touch the [OK] key. You will return to the base screen. Make sure that the entered dimensions appear in the [Original] key. STORING FREQUENTLY USED ORIGINAL SIZES You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and delete special original sizes. Storing original sizes (editing/clearing) Up to 12 special original sizes can be stored. Touch the [Original] key in the base screen of copy mode and then follow the steps below. 1 Original Auto Manual 5½x8½ 5½x8½R 8½x11 8½x14 8½x11R 8½x13(216x330) 8½x14 11x17 Touch the [Custom Size] key. OK AB Inch Size Input Custom Size 33