Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 184

Stamp Move Select the location to move the selected item. 4 Touch the key of the desired destination OK position. The touched position key is highlighted and the print position changes. The keys that show the print positions will appear as follows depending on the state of the settings. Not selected, stamp setting has not been selected. Selected during selection of the stamp setting. Not available, stamp setting has already been selected. The above key is the top left key. The appearance of each key varies depending on the position of the key. If you wish to swap the position of the selected stamp item with the position of another stamp item, temporarily move either one of the items to an unoccupied position and then switch the print positions. Stamp Move Select the location to move the selected item. 5 Touch the [OK] key. OK If you attempt to move the stamp item to a position that is already occupied by another stamp item, a message will appear asking you if you wish to overwrite the other stamp item. To overwrite the other stamp item, touch the [Yes] key. To cancel the move, touch the [No] key. An item has been already selected to this location. Overwrite the item? No Yes Stamp Layout 6 OK AAA AAA CONFIDENTIAL DO NOT COPY 1,2,3.. Touch the [OK] key. 103