Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 304
s have been scanned and then touch the [Read-End]
View all Sharp MX-6201N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
Press the [BLACK & WHITE START] key ( ). Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press 6 the [BLACK & WHITE START] key ( ). Repeat until all pages have been scanned and then touch the [Read-End] key. A beep will sound to indicate that scanning is finished. The [Configure] key can be touched in the scan-end confirmation screen to change the exposure, resolution, scan size, and send size. (However, when scanning each even-numbered page of the original, only the exposure can be changed.) To cancel scanning... Press the [STOP] key ( ). • Transmission is not possible at a size smaller than the original size. • This function cannot be used in direct transmission mode or when the speaker is used to dial. • The 2in1 function cannot be used when the original is other than 8-1/2" x 11" (A4) or 5-1/2" x 8-1/2" (B5 or A5) size. • When the scan size of the original is specified by numerical values, this function cannot be used. To cancel 2in1... Touch the [2in1] key in the screen of step 2 so that it is not highlighted. 75