Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 578

PERFORMING "Scan to HDD" Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 2 (4) (2) (1) (3) COPY IMAGE SEND DOCUMENT FILING Ready to scan to HDD. Press [Start] to scan original. File Retrieve File Information Scan to HDD Original HDD Status Ex Data Access Scan: Auto 8½x11 Store: Exposure Auto Text Resolution 200X200dpi Comp. Ratio Medium Color Mode Auto Mono2 Special Modes Auto Switch to document filing mode and select Scan to HDD settings. (1) Touch the [DOCUMENT FILING] key. (2) Touch the [Scan to HDD] tab. If you do not wish to select settings, go to the next step. (3) Select the original size, exposure, resolution, compression ratio, color mode, and special modes. See ""Scan to HDD" SCREEN" (page 20). (4) Touch the [File Information] key. The settings are the same as for "File". See "FILE INFORMATION" (page 17). If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided Tablet] key as appropriate for the original. or 3 To cancel scanning... Press the [STOP] key ( ). Press the [COLOR START] key ( ) or the [BLACK & WHITE START] key ( ). Scanning begins. For the procedure for placing the original, see step 4 of "SAVING A FILE WITH "Quick File"" (page 13). A beep will sound to indicate that Scan to HDD is completed. When Scan to HDD is performed without appending file information, the following user name and file name are automatically assigned to the file. User Name: User Unknown File Name: Mode_Month-Day-Year_Hour-Minute-Second (Example: HDD_04012006_112030AM) Stored to: Main Folder When user authentication is used, the user name that was used for login is automatically selected. 24