Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 307
WHITE START] key, to scan
View all Sharp MX-6201N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 307 highlights
5 To cancel scanning... Press the [STOP] key ( ). 6 Press the [BLACK & WHITE START] key ( ) to scan the front of the card. Turn the card over so that the back is face down, and press the [BLACK & WHITE START] key ( ) to scan the back of the card. Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure. To cancel scanning... Press the [STOP] key ( ). Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Touch the [Read-End] key. 7 Configure Read-End If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size. • The ratio cannot be specified and "Rotation Sending Setting" cannot be selected. • This function cannot be used in direct transmission mode or when the speaker is used to dial. To cancel Card Shot... Touch the [Cancel] key in the screen of step 3. 78