Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 204

(1) (2), (3) (4) Color Adjustments Color Balance OK Cancel OK Y 1 2 3 4 5 6 7 8 All M C Bk Adjust the color balance. Examples of color balance adjustment The settings of all gradations are moved toward + The settings of all gradations are moved toward - (1) Select the color to be adjusted. Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black). If only the rectangular area around the letter in a key is highlighted, the settings have been changed from the factory default settings. (2) Select the gradation to be adjusted. 3 Select the gradation with the keys. Touch the keys to move the highlighting to one of gradations "1" to "8" or "All". To adjust all eight gradations at once, move the highlighting to "All". (3) Adjust the density. To darken the density of the selected gradation, touch the [+] key. To lighten the density, touch the [-] key. Each time one of the keys is touched, the indicator frame moves up or down one level. (4) To adjust other colors, repeat steps (1) to (3). (5) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. To return the color balance values to the default settings... Touch the key. The values of all eight gradations will return to the default color balance values. The default color balance values are set in "Initial Color Balance Setting" in the system settings (administrator). 4 To cancel scanning and copying... Press the [STOP] key ( ). Press the [COLOR START] key ( ). Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOR START] key ( ). Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel a color balance setting... Touch the [Cancel] key in the screen of step 3. System Settings (Administrator): Initial Color Balance Setting This is used to set the default values to which the color balance values return when the 123 key is pressed.