Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 702

System Settings for Fax (Administrator) List When the system settings for fax are accessed with administrator rights, the following items appear. For information on the general settings, see "System Settings for Fax (General) List" (page 93). • For the procedure for using the system settings (administrator), see "Accessing the System Settings (Administrator)" (page 29). • Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. ■ Image Send Settings Item ■ Image Send Settings ● Fax Settings X Fax Default Settings ‹ Fax Own Name and Number Set ‹ Dial Mode Setting ‹ Auto Wake Up Print ‹ Pause Time Setting ‹ Speaker Settings • Speaker • Ringer Volume • Line Monitor • Fax Receive Complete Signal • Fax Send Complete Signal • Fax Communication Error Signal • Speaker Volume Details Setting ‹ Remote Reception Number Setting ‹ Original Print on Transaction Report Factory default setting - Tone Enabled 2 sec. Page 101 101 101 101 101 101 101 Volume: Middle Volume: Middle Volume: Middle Volume: Middle; Tone Pattern: 3 Transmission Complete Sound Time Setting: 3 sec. Volume: Middle; Tone Pattern: 3 Transmission Complete Sound Time 101 Setting: 3 sec. Volume: Middle; Tone Pattern: 3 Transmission Complete Sound Time Setting: 0.3 sec. each Speaker / Line Monitor Small: 3, Middle: 6, Big: 8 Ringer Volume / Reception End Signal / Transmission End Signal / Fax Communication Error Signal Small: 2, Middle: 4, Big: 8 5 101 Print Out Error Report Only 102 99