Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 98

MAKING A COPY USING THE DOCUMENT GLASS To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass. Original size detector Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder. Document glass scale mark Document glass scale mark 5-1/2" x 8-1/2" 1 (A5) B5R 8-1/2" x 11"R (A4R) B5 8-1/2" x 14" (B4) 8-1/2" x 11" (A4) 11" x 17" (A3) • Align the corner of the original with the tip of the arrow mark on the document glass scale. • Place the original in the appropriate position for its size as shown above. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size. Color Mode Special Modes Check the paper to be used and the Full Color 2-Sided Copy color mode. Plain 8½x11 Output Make sure that the desired paper (tray) and color mode are Exposure Auto 1. 2. 8½x11 8½x11 3. 11x17 4. 8½x14 selected. File • To change the paper (tray), touch the [Paper Select] key. 2 Copy Ratio Original Paper Select Quick File ☞ PAPER TRAYS (page 14) • To change the color mode, touch the [Color Mode] key. 100% Auto 8½x11 Auto 8½x11 Plain ☞ COPY COLOR MODES (page 24) Depending on the size of the placed original, there may be cases where the same size of paper as the original is not selected automatically. In this event, change the paper size manually. 17