Yamaha AW2400 Owner's Manual - Page 101
tion, turn the MULTI CONNECTION ON/OFF, recording-destination track, and press
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Input signal patching The indication in the screen will be as follows. HINT • You can also select the record-source input channel by pressing an [INPUT SEL] key (or the [SEL] key of an input channel). • The [INPUT SEL] keys always control input channels 1-8, regardless of the settings of the Layer section 4 Move the cursor to the symbol for the recording-destination track, and press the [ENTER] key. The selected input channel and track will be internally connected. At this time, the connected [INPUT SEL] key (or the input channel's [SEL] key) and the track channel's [SEL] key will change to blinking red. The blinking track channel [SEL] key indicates that the corresponding track is in record-ready mode. For example if input channel 1 and track 1 are connected, the top panel keys will be as follows. flash Tr ack channels (Layer section [TRACK 1-12] key lit) The indication in the screen will be as follows. HINT • You can also select the record-destination track by pressing a track channel's [SEL] key. • The same internal connection will be established even if you perform steps 3 and 4 in the reverse order. • The fader will automatically be set to 0 dB for input channels that are internally connected to a track. • If an input channel is selected as a recording-source, its assignment to the stereo bus will automatically be turned off. If you want to monitor the signal you're recording, you'll need to raise the fader of the recording-destination track channel. • EQ and dynamics settings will be set to a flat state for track channels corresponding to tracks selected as recording-destinations. NOTE • Input channels and tracks are always connected one-to-one. • The track numbers of muted tracks will be displayed as (mute), but you can still record to muted tracks. • Since 24-bit songs can have a maximum of 12 play tracks (→ p. 165), tracks 13-24 are muted and will not play back. 5 If you want to record multiple instruments or mics simultaneously, assign other input channels to other tracks in the same way. HINT • To cancel a connection you established, simply repeat the same operation you did when establishing the connection. • To change a recording-destination (track) that you've already connected, move the cursor to the recording-source and press the [ENTER] key; then move the cursor to a different track and press the [ENTER] key. • To change a recording-source (input channel) that you've already connected, move the cursor to the recording-destination and press the [ENTER] key; then move the cursor to a different input channel and press the [ENTER] key. • To cancel all connections, move the cursor to the SAFE button and press the [ENTER] key. • If a recording-source input channel and the recording-destination track are both paired, two adjacent odd-numbered/evennumbered channels will be assigned to two adjacent oddnumbered/even-numbered tracks. 6 If you want to connect a set of eight input channels and eight tracks in a single operation, turn the MULTI CONNECTION ON/OFF button on. For example if the MULTI CONNECTION ON/OFF button is on, and you select any one of input channels 1-8 as a recording-source and any one of tracks 1-8 as a recording-destination, the following popup window will appear. Patching and signal flow 11 Move the cursor to the YES button and press the [ENTER] key to execute the connection; input channels 1-8 will be connected to tracks 1-8. Move the cursor to the NO button and press the [ENTER] key to connect the selected input channel and track. AW2400 Owner's Manual 101