Yamaha AW2400 Owner's Manual - Page 150
EQ Control via the Selected, Channel
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
4-band EQ 6 Move the cursor to the parameter that you want to edit, and use the [DATA/JOG] dial or the [INC]/[DEC] keys to adjust the value. HINT • If you press the [F1] (FLAT) key while holding the [SHIFT] key from the PAN/EQ screen EQ/Att. page, all G knobs for the currently selected channel will be set to 0.0dB (or OFF). 16 7 To switch the LOW band type, move the cursor to the LOW band Q knob and continue turning the [DATA/JOG] dial toward the left or right. If you continue turning the Q knob toward the right, the Q knob value will indicate "L.SHELF," and will switch to the shelving type. If you turn the Q knob toward the left, the Q knob value field will change to a numerical value, and will switch to the same boost/cut type as the HI-MID and LO-MID bands. If you continue turning the Q knob toward the left, the Q knob value field will indicate "HPF," and the LOW band will function as a high-pass filter. If "HPF" is selected, you can use the LOW band G knob to switch the high-pass filter on/off. 8 To switch the HIGH band type, move the cursor to the HIGH band Q knob and continue turning the [DATA/JOG] dial toward the left or right. If you continue turning the Q knob toward the right, the Q knob value will indicate "H.SHELF," and will switch to the shelving type. If you turn the Q knob toward the left, the Q knob value field will change to a numerical value, and will switch to the same boost/cut type as the HI-MID and LO-MID bands. If you continue turning the Q knob toward the left, the Q knob value field will indicate "LPF," and the HIGH band will function as a low-pass filter. If "LPF" is selected, you can use the HIGH band G knob to switch the low-pass filter on/off. HINT • EQ settings can also be recalled from the EQ library, or your own settings can be saved for later recall. See "EQ/Dynamics Processor Library Operation" on page 154 for details. • If boost in a particular band results clipping on the meters, use the ATT. knob to reduce the signal level. • Selected Channel knobs 2, 3, and 4 also function while the PAN/EQ screen EQ/Att. page is showing. ■ EQ Control via the Selected Channel section Using Selected Channel section knobs 2-4 to adjust EQ. 1 Use the Layer section, [INPUT SEL], [SEL], and [STEREO SEL] keys to select the channel for which EQ is to be controlled. 2 Press the Selected Channel section [LOW], [LO-MID], [HI-MID], or [HIGH] key, according to the band you want to control. The selected key's indicator will light, as will the [PAN/EQ] key. With the default settings the PAN/EQ screen will appear automatically. The display will not change if the UTILITY screen Preference page AUTO DISPLAY button is set to OFF. 3 Rotate Selected Channel knobs 2-4. The parameters for the channels selected in step 1 and the band selected in step 2 will change accordingly. The knobs control the following parameters. Selected Channel knobs 2-4 2 Parameters Q 3 Frequency (center frequency) 4 Gain If the UTILITY screen Preference page AUTO DISPLAY button is set to OFF, a popup window showing the current EQ settings will appear while Selected Channel knobs 2-4 are being operated. Pan, EQ, and Dynamics Processing 150 AW2400 Owner's Manual