Yamaha AW2400 Owner's Manual - Page 78
Playing back the stereo track, switch the ST TR MODE ON/OFF button off.
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Playing back the stereo track Playing back the stereo track When you've finished the mixdown, you can play back the stereo track as follows. 1 Call the TRACK screen Stereo TR page by either pressing the Work Navigate section [TRACK] key as many times as necessary, or by pressing the [F3] key after pressing the [TRACK] key. ST TR MODE ON/OFF button 3 Press the RTZ [ ] key to rewind the song, and press the PLAY [ ] key. The stereo track will be played back. Use the [STEREO] fader to adjust the monitor level. 4 When you are ready to return to normal recording/playback of the audio tracks, switch the ST TR MODE ON/OFF button off. 8 Mixdown and bounce operations 2 Switch the ST TR MODE ON/OFF button ON. When this button is on, the stereo track output will be sent to a point directly before the [STEREO] fader, and can be monitored from the [STEREO OUT] jack, the [MONITOR OUT] jack, or the [PHONE] jack. At this time, the record-ready status of all tracks will be cancelled. HINT • If any audio tracks are in record-ready mode, a popup window will ask you to confirm that you want to defeat the recordready status. If you want to play back the stereo track, move the cursor to the OK button and press the [ENTER] key. NOTE • The EQ and dynamics processor of the stereo output channel are disabled while the stereo track is playing back. 78 AW2400 Owner's Manual