Yamaha AW2400 Owner's Manual - Page 205
Cubase, Logic, Sonar, Protools, Volume/Rec TR, Volume, When the 1-12 is showing., MODE box
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Using the MIDI Remote function The MIDI channels corresponding to the faders and [ON] keys appears as follows when the REMOTE screen 1-12 and 13-16 pages are selected. ■ When the 1-12 page is showing. Fader/[ON] Key MIDI Channel 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 ■ When the 13-16 page is showing. Fader/[ON] Key MIDI Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 N/A To call the REMOTE screen 1-12 page press the Layer section [REMOTE] key as many times as necessary, or press the [F1] key after pressing the [REMOTE] key. B A C D To call the REMOTE screen 13-16 page press the Layer section [REMOTE] key as many times as necessary, or press the [F2] key after pressing the [REMOTE] key (Operation of the 13-16 page is the same as the 1-12 page). HINT • The MIDI Remote function will automatically be on while the REMOTE screen is displayed. The channel faders and [ON] keys will not perform their usual functions, but will work as specified by the preset you have selected in the REMOTE screen. This page contains the following items. 1 MODE box Selects one of the ten presets. Move the cursor to a box and use the [DATA/JOG] dial or [INC]/[DEC] keys to select the corresponding preset for instantaneous MIDI message assignment. The AW2400 provides the following presets. ● Cubase ● Logic ● Sonar ● Protools These presets let you use the AW2400 as a physical controller for various software sequencers. • [ON] key operations will control mute on/off operations on the sequencer software. • Fader operations will control the volume of the sequencer software tracks. You will need to install the appropriate setting file into your sequencer software, and make the necessary settings. For details, refer to the "About the CD-ROM included with the AW2400" (→ p. 266). ● Volume/Rec TR Use this preset to control the volume of an external tone generator or the record tracks of an external recorder. • [ON] key operations will transmit MMC commands to select recording tracks. • Fader operations will transmit Volume control changes (CC#=07). ● Volume Use this preset to control the volume of an external tone generator. • When you turn an [ON] key off (indicator out), volume = 0 will be transmitted. • When you turn an [ON] key on (lit green), the volume value corresponding to the fader position will be transmitted. • When an [ON] key is on, operating the fader will transmit Volume control change messages (CC#=07). 20 MIDI AW2400 Owner's Manual 205