Yamaha AW2400 Owner's Manual - Page 110
Recalling Channel Library settings, keys to select the library setting to
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Channel Library Operation Recalling Channel Library settings The procedure for recalling stored library settings is as follows. 1 Call the CH VIEW screen Library page by either pressing the [VIEW] key as many times as necessary, or by pressing the [F2] key after pressing the [VIEW] key. 2 Use the [DATA/JOG] dial or [INC]/[DEC] keys to select the library setting to be recalled. The setting highlighted by a dotted frame is currently selected for recall. 3 Move the cursor to the RECALL button and press the [ENTER] key. A popup window confirming the recall operation will appear. Erasing Channel Library settings The procedure for erasing unwanted library settings is as follows. NOTE • Read-only library settings (those marked with an be erased. icon) cannot 1 Call the CH VIEW screen Library page by either pressing the [VIEW] key as many times as necessary, or by pressing the [F2] key after pressing the [VIEW] key. 2 Use the [DATA/JOG] dial or [INC]/[DEC] keys to select the library setting to be erased. The setting highlighted by a dotted frame is currently selected to be erased. 3 Move the cursor to the CLEAR button and press the [ENTER] key. A popup window confirming the clear operation will appear. 12 HINT • Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the RECALL button. Channel Operation 4 To actually recall the selected setting move the cursor to the OK button and press the ENTER] key. HINT • Parameters that do not exist in the target channel will be ignored. • INSERT EFF settings as shown in the CH VIEW screen View page are not included in the channel libraries and will not change. • When the target channel is a stereo channel or a channel pair, all parameters except phase and pan will be set to the same values (phase and pan will not change). • When data cannot be recalled to the selected channel the "Recall Channel Data Conflict!" error message will appear. HINT • Pressing the [F3] key while holding the Display section [SHIFT] key has the same effect as the CLEAR button. 4 To actually erase the selected setting move the cursor to the OK button and press the [ENTER] key. 110 AW2400 Owner's Manual