Yamaha AW2400 Owner's Manual - Page 227
Check the Status Of the Digital Input Signal, STEREO BUS CASCADE button
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Wordclock and Cascade Settings • Check the Status Of the Digital Input Signal 4 Move the cursor to the STEREO BUS CASCADE field. Cascade connection settings are made in the STEREO BUS CASCADE field. A B 1 STEREO BUS CASCADE button Enables or disables the cascade connection. B ATT knob Adjusts the level of the signal received at the [DIGITAL STEREO IN] connector. 5 Move the cursor to the STEREO BUS CASCADE button and press the [ENTER] key. This connects the digital audio signal received from the external device directly to the AW2400 stereo bus. 6 Use the ATT knob to adjust the level of the received digital signal as required. You can now mix and record the signals from the AW2400's own inputs along with the digital audio received at the [DIGITAL STEREO IN] connector to the AW2400 stereo track. NOTE • In order to record the signal received at the [DIGITAL STEREO IN] connector the UTILITY screen Preference page CD/ DAT DIGITAL REC button must be set to ENABLE. Check the Status Of the Digital Input Signal You can visually check the status of the signals received at the [DIGITAL STEREO IN] connector as well as signals received via an I/O card installed in the rear-panel slot in the DIO screen Status page. To call this page press the Work Navigate section [DIO] key as many times as necessary, or press the [F2] key after pressing the [DIO] key. This is a display-only page that does not include any editable settings. A B C D This page contains the following items. 1 Status Indicates the status of received digital signals. The meanings of the displays are as follows: NOTE • The following status displays will appear as "----" when a MY8-AT, MY8-TD, MY16-AT, or MY16-TD I/O card is installed. • Fs (Sampling Frequency) Indicates the sampling frequency of the received digital signal. Parameter values 44.1k 48k None UNLOCK Description Sampling frequency = 44.1kHz Sampling frequency = 48kHz Unknown sampling frequency No input signal, or inappropriate input signal. • EMPHASIS Indicates whether emphasis is on or off for the received digital signal. Parameter values On Off ??? Description Emphasis ON Emphasis OFF Unknown Digital Input/Output & Optional Card Settings 23 AW2400 Owner's Manual 227