Yamaha AW2400 Owner's Manual - Page 33
Switching Mixing Layers, Using the Selected Channel
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Basic operation of the AW2400 Switching Mixing Layers Switching mixing layers affects the functions of [ON] keys 1-12, [SEL] keys 1-12, and faders 1-12, allowing efficient control in a variety of signal- routing configurations. Remote control of external equipment is also possi- 2 ble. Different mixing layers are selected via the keys in the LAYER section. The key corresponding to the currently selected mixing layer will be lit. Introducing the AW2400 The mixer section controls correspond to the various mixing layers as follows: Layer Section LAYER Section Key [IN 1-8] [IN 9-16] [MASTER] [TRACK 1-12] [TRACK 13-24] [REMOTE] 1 2 Bus Masters 1-2 3 4 5 6 Input Channels 1-8 Input Channels 9-16 Fader Section 7 8 9 10 11 12 Effect Return Channels 1-4 Effect Return Channels 1-4 STEREO No Control AUX Send Masters 1-4 Track Channels 1-12 Track Channels 13-24 * Effect Send Masters 1-4 Stereo Output Channel Control * Operation depends on settings. Refer to page 204 for details. For example, if the LAYER section [IN 1-8] key is engaged and the [SEL] 1 key is pressed, input channel 1 will be selected. If the LAYER section [TRACK 1-12] is then engaged and the same [SEL] 1 key is pressed, track channel 1 will be selected. HINT • The [STEREO SEL] key, [STEREO ON] key, and [STEREO] fader always control the stereo output channel. These controls are not affected by layer switching. Using the Selected Channel section You can use the knobs and keys of the Selected Channel section to directly operate the mix parameters (EQ, dynamics, pan, etc.) of the currently selected channel. 1 Use the [SEL] keys or [STEREO SEL] key to select the channel that you want to operate. The currently selected channel is indicated in the upper left of the screen. The channels correspond to each key as follows. • [SEL] keys 1-12 Input channels 1-16, Track channels 1-24, Effect Return channels 1-4 • [STEREO SEL] key....... Stereo output channel HINT • The channels to be selected by [SEL] keys 1-12 are switched via the LAYER section. Currently selected channel. AW2400 Owner's Manual 33