Yamaha AW2400 Owner's Manual - Page 82
Convenient functions for mixdown/bounce, Fader Group assignments
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Convenient functions for mixdown/bounce Convenient functions for mixdown/bounce Here we will explain some functions that you will find convenient when performing mixdown or bounce operations. Fader Group assignments Fader Grouping is a function that links the fader operations of multiple channels. For example if you've recorded multiple track channels of drums or chorus, you can assign these drum channels or chorus channels to the same fader group so that moving any one of the faders in the group will adjust all of the levels together. 1 Call the MONITOR screen Fader Grp. page by either pressing the Quick Navigate sec- tion [MONITOR] key as many times as nec- 8 essary, or by pressing the [F2] key after pressing the [MONITOR] key. This page contains the following items. A B C 3 Use the Layer section keys, the [INPUT SEL] keys, and the [SEL] keys to select the channels that you want to assign to this fader group. The assignment to the fader group will alternately be switched on or off each time you press the [INPUT SEL] key or [SEL] key. HINT • If you want to defeat all assignments for the fader group you're currently operating, hold down the Display section [SHIFT] key and press the [F1] key. • If you want to defeat all assignments in the Fader Grp. page, hold down the [Display section [SHIFT] key and press the [F2] key. 4 Repeat steps 2-3 to make assignments for other fader groups. NOTE • You can't assign a single channel to more than one fader group. Mixdown and bounce operations 1 ENABLE field Use these buttons to switch fader groups A-D on/off. The A-D buttons will be highlighted to indicate fader groups that are turned on. You will also use this field to select the fader group that you want to operate. B INPUT field C TRACK field These areas indicate the fader group to which each input channel 1-16 and track channel 1-24 is assigned. The "●" symbol indicates channels that are assigned, and the "..." symbol indicates channels that are not assigned. 2 In the ENABLE field, move the cursor to the button A-D of the fader group that you want to operate. 5 To enable a fader group, move the cursor to the A-D buttons and press the [ENTER] key. Buttons A-D can be turned on/off independently. 6 Operate a channel that is assigned to a fader group. The faders of all channels assigned to that fader group will move in tandem. NOTE • When operating channels that are assigned to a fader group, you must use only one fader. If you attempt to move two or more faders simultaneously, the motor faders will be stressed, and possibly damaged. HINT • If you want to adjust the fader value for only a specific channel that is assigned to a fader group, operate its fader while holding down the [SEL] key or [INPUT SEL] key for that channel. • The fader group assignments are available even when Trigger Track mode is engaged. • The fader group assignments in the Fader Grp. page can be copied to the Mute Grp. page by holding down the Display section [SHIFT] key and pressing the [F4] key. 82 AW2400 Owner's Manual