Yamaha AW2400 Owner's Manual - Page 129
Muting a specific audio track, Switching the virtual track of an audio track
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Audio track operations Muting a specific audio track 1 Call the TRACK screen View page. 2 Move the cursor to the TRACK field, and use the [DATA/JOG] dial or the [INC]/[DEC] keys to select the number of the track you want to mute. 3 Move the cursor to the MUTE button and press the [ENTER] key. Muting will be switched on/off. If a track is muted, the MUTE symbol changes to "●." When you press the [ENTER] key once again, muting will be defeated and the MUTE symbol will change to " ." HINT • This mute function switches muting on or off for the recorder track playback. This also affects the number of simultaneous playback tracks in the recorder section (→ p. 128). It's a good idea to mute all unused tracks. • Since 24-bit songs allow a maximum of 12 playback tracks, mute cannot be disengaged for tracks 13-24. • In some cases, depending on the number of tracks that are in record-ready mode, you won't be able to un-mute a track. In this case, decrease the number of tracks that are in recordready mode, and then un-mute the desired track. Switching the virtual track of an audio track 1 Call the TRACK screen Virtual TR page by either pressing the Work Navigate section [TRACK] key as many times as necessary, or by pressing the [F2] key after pressing the [TRACK] key. This page contains the following items. A B C 1 Virtual tracks Indicates the status of virtual tracks 1-8. The virtual track that is currently selected for each track is indicated by a "●" symbol. Of the virtual tracks that are currently not selected, those that have been recorded are indicated by " ", and those that have not yet been recorded are indicated as "-". HINT • When the AW2400 is in its default state, virtual track 1 is selected for every track. 15 Track operations and editing B Virtual track name This indicates the name of the virtual track selected by the cursor. This will indicate "-NO REC-" for tracks on which nothing has been recorded. C Tracks Indicates the track number 1-24. 2 Use the cursor keys to select the virtual track number that you want to assign to the desired track. 3 Press the [ENTER] key. The "●" symbol will be displayed at the position of the newly-selected virtual track. This virtual track will now be used for recording/playback. HINT • To switch the virtual track of the stereo track, use the TRACK screen Stereo TR page. AW2400 Owner's Manual 129