Yamaha AW2400 Owner's Manual - Page 60
Applying EQ To an Input Signal
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Applying EQ To an Input Signal Applying EQ To an Input Signal The AW2400 provides versatile 4-band equalizers on every channel that can be directly operated via the Selected Channel section keys and knobs. This section describes the procedure for applying EQ to input channels 1-8. 1 Press the Layer section [IN 1-8] key so that its indicator lights, the press the [SEL] key for the channel to which EQ is to be applied. HINT • The [INPUT SEL] 1-8 keys can also be used to select an 6 input channel for equalization. Track recording 2 Press the Selected Channel section [PAN/ EQ] key so that its indicator lights. Press Selected Channel knob 1, 2, 3, or 4 and the PAN/EQ screen will appear. 3 Press the Display section [F3] key to call the EQ/Att. page. The EQ settings are available via this page. EQ ON/OFF button 4 To turn the EQ on, move the cursor to the EQ ON/OFF button and press the [ENTER] key. 5 Press the Selected Channel section [LOW], [LO-MID], [HI-MID] or [HIGH] key to select the EQ band to be adjusted. 6 Use Selected Channel section knobs 2-4 to adjust the EQ as required. When the [PAN/EQ] key is lit, Selected Channel knobs 2-4 perform the following functions: knob 2 adjusts the Q, knob 3 adjusts the center frequency, and knob 4 adjusts the gain of the selected band. 7 Repeat steps 5 and 6 to set all bands as required. HINT • In addition to the ability for fine EQ control as described above, the supplied EQ library contains preset EQ setups for a variety of instruments that can be recalled and used or edited as required. Refer to "Pan, EQ, and Dynamics Processing" on page 147 for details. HINT • Pages can also be selected by repeatedly pressing Selected Channel section knobs 1-4. 60 AW2400 Owner's Manual