Yamaha AW2400 Owner's Manual - Page 87
Transport/Locate Operation, The Transport Keys, Move To a Specified Location
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 9 Transport/Locate Operation This chapter covers transport key operation, use of the locate/marker functions, and a range of other playback features. The Transport Section Keys The functions of the Transport section keys change according to the current state of the recorder (playback, stopped, etc.), as listed in the chart below. Transport/Locate Operation Key Playing Stopped Recorder Status Rewinding Fast Forwarding Recording PLAY[ ] key - Play Play Play Stop record and play (Punch Out) STOP[■] key REW[ ] key Stop Rewind - Rewind Stop Rewind speed (8x ↔ 16x) Stop Rewind Stop 9 - FF[ ] key Fast forward Fast forward Fast forward Fast forward speed (8x ↔ 16x) - Return to zero and play Return to zero and play RTZ[ ] key Return to zero and play Return to zero and stop or stop (depending on Play/Stop status prior to or stop (depending on Play/Stop status prior to - rewind) fast forward) REC[●] key Press simultaneously with PLAY [ ] key to begin recording (Punch In) Press simultaneously with PLAY [ ] key to begin recording - - - The REC [●] key has no effect if no tracks are set to the record standby mode. Move To a Specified Location The AW2400 allows you to move directly to any location in a song by numerically specifying the desired locate point. 1 With the recorder stopped, press the Locate/Number section [NUM.LOCK] key so that its indicator lights. A popup window will appear into which you can enter the destination locate point. 2 Enter the locate point in measures/beats. You can use either of the following two methods to enter the locate point. ● Use the [DATA/JOG] dial or [INC]/[DEC] keys Move the cursor to the measure or beat field, and use the [DATA/JOG] dial or [INC]/[DEC] keys to set as required. AW2400 Owner's Manual 87