Yamaha AW2400 Owner's Manual - Page 111
AUX, About the AUX buses, AUX Send Level Adjustment
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Chapter 13 AUX This chapter describes operation of the AW2400 AUX buses. About the AUX buses The AW2400 has 4 auxiliary buses that can be assigned to the [OMNI OUT] jacks, the [DIGITAL STEREO OUT] connectors, or the outputs of an optional I/O card installed in the I/O slot. This can be useful for sending signals to external signal processing gear, or for monitoring specific signals within a mix. Signals from the following channels can be sent to the AUX buses. • Input channels • Track channels • Effect return channels HINT • Refer to "Output signal patching" on page 104 for details on assigning the AUX bus outputs. • AUX 1/2 and 3/4 can be assigned as pairs (→ p. 58). AUX Send Level Adjustment 13 AUX AUX send levels can be adjusted either by using the graphic knobs in the AUX screen or by using the Selected Channel section controls. ■ Adjusting AUX send levels via the AUX screen AUX send levels can be adjusted using the graphic knobs in the AUX screen. 1 Press the Selected Channel section [AUX] key so that its indicator lights. The AUX screen will appear. NOTE • If the AUTO DISPLAY function is set to OFF, press one of the Selected Channel knobs (1-4) after pressing the [AUX] key so that its indicator lights. For details about the AUTO DISPLAY function refer to "AW2400 Preferences" on page 210. 2 To adjust levels for the AUX1 bus press Selected Channel knob 1. The AUX1 screen will appear. To adjust levels for the AUX2-AUX4 buses press the corresponding Selected Channel knob (2-4) in the same way. If the [AUX] key is lit pressing one of the Selected Channel knobs will take you directly to the corresponding AUX screen. 3 Press the Display section [F1] (Input/RTN page) or [F2] (Track page) key. The page displays and the items they contain are as follows. AW2400 Owner's Manual 111