Yamaha AW2400 Owner's Manual - Page 113
Using external effects with the AUX buses, Press the Selected Channel AUX]
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Using external effects with the AUX buses Using external effects with the AUX buses External effect processing gear connected via the [OMNI OUT] jacks can be used in place of the internal effects. The example given in this section describes the procedure for applying an external mono-in/stereo-out reverb processor to a track channel via the AUX1 bus. 1 Lower the [STEREO] fader to the -∞ position. 2 Call the PATCH screen Output page by pressing the Work Navigate section [PATCH] key. This page is used to assign the AW2400's various internal signals to the output connectors. 3 Move the cursor to the OMNI OUT ASSIGN 1 field and use the [DATA/JOG] dial or the [INC]/[DEC] keys to select "AUX1". This assigns the AUX1 bus signal to [OMNI OUT] jack 1. 5 Press the Selected Channel section [AUX] key so that its indicator lights, then press Selected Channel knob 1. The AUX1 screen will appear. 6 Press the Display section [F2] key to display the Track page. The send levels from the track channels to the AUX1 bus can be adjusted via this page. 7 Set the knobs for each channel to an appropriate level, and set the PRE/POST buttons as required. At this point the track channel signals are being sent to the [OMNI OUT] jack 1 via the AUX1 bus, and are being fed to the external effect processor's input. HINT • The AUX bus signals can also be assigned to an I/O card installed in the I/O slot, or the [DIGITAL STEREO OUT] connector. 8 Use the Quick Navigate section [RECORD] key to call the RECORD screen Mixdown page, and set the parameters as shown in the illustration. 13 AUX 4 Referring to the diagram, connect the external signal processor to the AW2400. Effect Processor [MIC/LINE INPUT] jacks 3/4 [OMNI OUT] jack 1 AW2400 [MONITOR OUT] jacks With these settings track channels 1-24 and the effect signals returned to input channels 3/4 are mixed and sent to the stereo bus. AW2400 Owner's Manual 113