Yamaha AW2400 Owner's Manual - Page 98
METER screen Master F3] key, BUS1 L/R, BUS2 L/R output levels
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Level Meter Types G PEAK HOLD button This button switches the level meter peak hold function on/off. When this button is on, an indicator will show the signal peaks. HINT • The Input/RTN page and Track page PRE EQ/PRE FADER/POST FADER button settings are linked, while the Master page settings are independent. • The PEAK HOLD button setting affects all METER pages. • Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the PEAK HOLD button. ■ METER screen Master page ([F3] key) Displays the output and fader levels for BUS1 L/R, BUS2 L/R, AUX bus 1-4, effect bus 1-4, and the stereo bus. A B C HINT • These PRE EQ/PRE FADER/POST FADER settings are independent from those on other pages. • The PEAK HOLD button setting affects all METER pages. • Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the PEAK HOLD button. ■ METER screen Output page ([F4] key) Displays the output and fader levels for a digital I/O card installed in the card slot, the [OMNI OUT] 1-4 outputs, and the [DIGITAL STEREO OUT] outputs. A 10 Meters D B C D E FG H The following items are displayed: 1 BUS1 L/R, BUS2 L/R output levels B AUX bus 1-4 output levels C Effect bus 1-4 output levels D Stereo bus output level The level meters display the output levels for the corresponding channels, while the numbers below the level meters show the fader levels in dB. E PRE EQ button Pre-EQ levels (levels prior to the EQ stage) are displayed when this button is on. F PRE FADER button Pre-fader levels (levels prior to the faders) are displayed when this button is on. G POST FADER button Post-fader levels (levels after the faders) are displayed when this button is on. H PEAK HOLD button This button switches the level meter peak hold function on/off. The following items are displayed: 1 Output levels for the card installed in the slot B [OMNI OUT] 1-4 output levels C [DIGITAL STEREO OUT] output levels The level meters display the output levels for the corresponding channels, while the numbers below the level meters show the fader levels in dB. D PEAK HOLD button This button switches the level meter peak hold function on/off. HINT • The PEAK HOLD button setting affects all METER pages. • Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the PEAK HOLD button. 98 AW2400 Owner's Manual