Yamaha AW2400 Owner's Manual - Page 24
Selected Channel Monitor Scene/Automix/USB DYN] key, AUX] key, EFFECT] key
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Parts of the AW2400 and what they do ■ Selected Channel section Introducing the AW2400 21 B C D E F G 1 [VIEW] key This key accesses the CH VIEW screen, where you can check the level of each channel, or perform on-screen adjustments to the faders and other mix parameters of each channel. B [DYN] key Calls the DYNAMICS screen for the currently selected channel. You can then press any of the SELECTED CHANNEL knobs - 1 through 4 - to access the corresponding dynamics parameters. C [AUX] key Calls the AUX screen for the currently selected channel. You can then press any of the SELECTED CHANNEL knobs - 1 through 4 - to access the corresponding AUX parameters. D [EFFECT] key Calls the EFFECT screen for the currently selected channel. You can then press any of the SELECTED CHANNEL knobs - 1 through 4 - to access the corresponding EFFECT parameters. E [PAN/EQ] key Calls the PAN/EQ screen for the currently selected channel. After pressing the [PAN/EQ] key, you can press any of the Selected Channel knobs 1 through 4 to switch the PAN/EQ screen pages. F SELECTED CHANNEL knobs 1-4 These knobs are used to adjust the various parameters for the selected channel. Press any of these knobs after pressing the [DYN], [AUX], [EFFECT] or [PAN/EQ] key to call the corresponding parameter screen. G [LOW], [LO-MID], [HI-MID], and [HIGH] keys These keys specify the EQ band to be adjusted by the SELECTED CHANNEL knobs when the EQ screen EQ page is showing. ■ Monitor section 1 1 [MONITOR] knob This knob adjusts the level of the signal that is output from the [MONITOR OUT] jacks. 2 B [PHONES] knob This knob adjusts the level of the signal that is output from the [PHONES] jack. ■ Scene/Automix/USB section 1 2 3 24 AW2400 Owner's Manual 1 [SCENE] key This key accesses the SCENE screen, where you can save or recall scene memories. B [AUTOMIX] key This key accesses the AUTOMIX screen which allows control and editing of automix operations. C [USB] key The [USB] keys calls up the USB screen with parameters related to USB operation.