Yamaha AW2400 Owner's Manual - Page 92
Adjusting the position of a marker, EDIT] key as many times as necessary, or
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Adjusting the position of a locate point or marker 3 Move the cursor to the locate point value that you want to adjust, and use the [DATA/ JOG] dial or [INC]/[DEC] keys to change the value. A "Change START Position?" popup window will ask you for confirmation when you attempt to change the Start point value. Move the cursor to the OK button and press the [ENTER] key, and then change the value. NOTE • Changing the Start point will cause locations already recorded in a track to move relative to the measure lines defined by the tempo map. Please keep this in mind if you are using measure display for the metronome. 4 To adjust the location of a quick locator point, move the cursor to the LOCATOR button in the Quick Locator/Marker filed and press the [ENTER] key. When the LOCATOR button is on, the Quick Locator/ 9 Marker field will list the quick locate points that have been registered. A Transport/Locate Operation B C D 1 List Lists the quick locator points that have been registered. The line that is enclosed by a dotted frame is selected for editing. B Quick locator points These are the quick locator point numbers 1-9. C Position Shows the position of each quick locator point using the counter display format. D Measure/beat Shows the position of each quick locator point in measure/beat units. 5 Move the cursor to the quick locator point numbers, and use the [DATA/JOG] dial or [INC]/[DEC] keys to scroll through the list so that the dotted frame encloses the quick locator point number that you want to edit. 6 Move the cursor to the value that you want to edit, and use the [DATA/JOG] dial or [INC]/[DEC] keys to edit the value. Adjusting the position of a marker 1 Call the EDIT screen Mark Adj. page by either pressing the Work Navigate section [EDIT] key as many times as necessary, or by pressing the [F3] key after pressing the [EDIT] key. 2 If you want to adjust the position of a marker, move the cursor to the MARKER button in the Quick Locator/Marker field. When the MARKER button is on, the Quick Locator/ Marker field will list the markers that have been registered. A B C D 1 List Lists the markers that have been registered. The line that is enclosed by a dotted frame is selected for editing. B Markers These are the marker numbers 1-99. C Position Shows the position of each marker using the counter display format. D Measure/beat Shows the position of each marker in measure/beat units. 3 Move the cursor to the marker numbers, and use the [DATA/JOG] dial or [INC]/[DEC] keys to scroll through the list so that the dotted frame encloses the marker number that you want to edit. 4 Move the cursor to the value that you want to edit, and use the [DATA/JOG] dial or [INC]/[DEC] keys to edit the value. 92 AW2400 Owner's Manual