Yamaha AW2400 Owner's Manual - Page 77
Press the RTZ, Then hold down the REC
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Mixdown procedure 10 To check the level of the signal that is being output to the stereo track, press the [METER] key, then press the [F3] key. The METER screen Master page will appear. Indicates the output level of the stereo output channel 11 Move the cursor to the POST FADER button and press the [ENTER] key. The post-fader signal level will be displayed. If the level meter reaches the "OVER" position, lower the [STEREO] fader. 12 Press the [RECORD] key to return to the RECORD screen Mixdown page. 13 Move the cursor to the REC button, and press the [ENTER] key to turn the button on. The top panel [STEREO SEL] key will blink red. This blinking indicates that the stereo track is in recordready mode. 14 Press the RTZ [ ] key to rewind the song. Then hold down the REC [●] key and press the PLAY [ ] key. The song will begin playing, and the playback will be recorded on the stereo track. 15 When you reach the end of the song, move the cursor to the SAFE button in the screen and press the [ENTER] key. A popup window will ask you to confirm that you want to cancel record-ready mode. Move the cursor to the OK button and press the [ENTER] key. 8 HINT • Instead of using the AW2400's internal stereo track, you can also mixdown to an external recorder connected to the [STEREO OUT] jacks or [DIGITAL STEREO OUT] connector. In this case, start playback on the AW2400 after you've put your external recorder in record mode. 16 Save the song. If the song is not saved after it has been recorded as a stereo track, it cannot be selected for burning to a CD. Mixdown and bounce operations AW2400 Owner's Manual 77