Yamaha AW2400 Owner's Manual - Page 31
Accessing a screen/ Switching a button on/off, Editing a value in the display
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Basic operation of the AW2400 Accessing a screen/page When you want to edit an internal setting of the AW2400, or to edit a parameter that cannot be operated by a fader or knob on the top panel, you will need to access the desired screen and page. 1 Press the key or knob for the desired screen. The keys and knobs of various sections listed below have their own screens, and the corresponding screen will be displayed when you press a key or knob. • All keys in the Work Navigate section • All keys in the Quick Navigate section • The [METER] key in the Display section • The [VIEW]/[DYN]/[AUX]/[EFFET]/[PAN/EQ] keys of the Selected Channel section • All knobs of the Selected Channel section • All keys of the Scene/Automix/USB section • The [REMOTE] key of the Layer section • The [SOUND CLIP] key of the Locate section HINT • Press a SELECTED CHANNEL knob after pressing the SELECTED CHANNEL [DYN], [AUX], [EFFECT, or [PAN/EQ] key to access the related display screen. • When you switch screens, the page that was last used in that screen will be displayed. 2 Use the [F1]-[F4] keys to select different pages within a screen. The [F1]-[F4] keys correspond to the tabs as follows. [F1] key [F2] key [F3] key [F4] key HINT • You can access the pages in sequence by repeatedly pressing the key referred to in step 1, above. Introducing the AW2400 Switching a button on/off Here's how to switch a button in the screen on/off. 1 Use the [CURSOR] keys to move the cursor to the 2 desired button in the screen. 2 Press the [ENTER] key. The button will be switched on/off. If you move the cursor to a button that executes a specific function and then press the [ENTER] key, that function will be executed. Editing a value in the display Here's how to edit the value of a knob or parameter shown in the display. 1 Use the [CURSOR] keys to move the cursor to the desired knob or parameter value. 2 Turn the [DATA/JOG] dial or press the [INC]/[DEC] keys to edit the value. Using Additional Function Buttons When an mark appears in the lower left corner of the display the tabs shown along the bottom of the display can be switched to provide additional functions. 1 Press the [SHIFT] key when any screen with an mark in the lower left corner is showing. The additional function buttons will appear in place of the tabs along the bottom of the display while the [SHIFT] key is held. Additional Function Buttons 2 While holding the [SHIFT] key press the [F1]-[F4] button to execute the corresponding function. AW2400 Owner's Manual 31