Yamaha AW2400 Owner's Manual - Page 106
Stereo output channel, Bus master channels 1
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Displaying the mix parameters for individual channels ■ Stereo output channel E G H A D F ■ Effect send master channels 1-4 E A F K ■ Bus master channels 1, 2 E G A 12 D F Channel Operation K ■ AUX send master channels 1-4 E G A B D F K 106 AW2400 Owner's Manual K 1 INITIALIZE button Initializes all parameters for the currently displayed channel. HINT • Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the INITIALIZE button. B Channel Pair Indicator Indicates whether the displayed channel is part of a pair or not. You can also move the cursor to this indicator and press the [ENTER] key to turn pairing on or off. C PHASE button, GATE button • PHASE button ..... Switches the phase (polarity) of the input signal. Move the cursor to this button and press the [ENTER] key to switch between normal (N : NORMAL) and reverse (R : REVERSE) polarity. • GATE button (input channels only Move the cursor to this button and press the [ENTER] key to turn the gate for that channel on or off. Refer to "Using the Gates" on page 151 for details. D ATT button, EQ button • ATT button........... Move the cursor to this knob and use the [DATA/JOG] dial or [INC]/ [DEC] keys to adjust the attenuation as required (range: -96-+12dB). This capability can be used to attenuate the pre-EQ signal level to prevent clipping in the EQ stage. • EQ button Move the cursor to this button and press the [ENTER] key to turn the EQ for that channel on or off. Refer to "4-band EQ" on page 149 for details.