Yamaha AW2400 Owner's Manual - Page 266

About the CD-ROM included with the AW2400 About the CD-ROM included with the AW2400 Special Notices • The software and this owner's manual are the exclusive copyrights of Yamaha Corporation. • Use of the software and this manual is governed by the license agreement which the purchaser fully agrees to upon breaking the seal of the software packaging. (Please read carefully the Software Licensing Agreement at the end of this manual before installing the application.) • Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. • Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. • This disk is a CD-ROM. Do not attempt to play the disk on an audio CD player. Doing so may result in irreparable damage to your audio CD player. • Future upgrades of application and system software and any changes in specifications and functions will be announced separately. Contents of the CD-ROM The included CD-ROM contains a backup file that you can use to restore the AW2400 to its factory-set condition, setting files that let you use the AW2400's MIDI Remote function with various DAW software, and a USB MIDI driver that is necessary to allow MIDI message transmission and reception via the USB connector. Folder/ file name Software name Contents AW24_000.TAR Demo song Backup file for restoring the internal hard disk to its factory-set condition. Cubase/Nuendo remote setup file Setting file for remotely controlling the Cubase/Nuendo software from the AW2400. Remote Setting file for remotely conLogic preference file trolling the Logic software from the AW2400. SONAR template file (Windows only) Setting file for remotely controlling the SONAR software from the AW2400. USBdrv_ Yamaha USB MIDI Driver Driver file for exchanging MIDI messages between the AW2400 and a computer via a USB cable. Installing USB MIDI driver If you are connecting the AW2400 to your computer via a USB cable for MIDI message transmission and reception, you need to install the Yamaha USB MIDI driver. ■ System Requirements OS: Windows XP Professional/Home Edition SP1 or higher, or Mac OS X 10.3 or higher ■ Installing on Windows XP 1 Start your computer to launch Windows, then log in as Administrator. 2 Click the [Start] button, and then click [Control Panel]. If the control panel appears as "Pick a category", click "Switch to Classic View" in the upper left of the window. All control panels and icons will be displayed. 3 Go to [System Hardware] ➝ [Driver signatures] ➝ [Driver signature options], select "Ignore - Install software without asking for confirmation," and then click [OK]. 4 Click [OK] to close the "System Properties" window, and then click the Close button to close the "Control Panel" window. 5 Insert the included CD-ROM into the CD-ROM drive. 6 First, make sure the POWER switch on the AW2400 is set to STANDBY, then use a USB cable to connect the USB connector of the computer to the USB connector of the AW2400. When the AW2400 is turned on, the computer automatically displays the "Found New Hardware Wizard." 7 If the "Can Windows connect to Windows Update to search for software?" is displayed, select "No, not this time", and then click [Next]. 8 Select "Install software automatically (recommended) (I)," and then click [Next]. The system starts the installation. NOTE • Some computers may take a few minutes to show this screen. Appendix 266 AW2400 Owner's Manual