Yamaha AW2400 Owner's Manual - Page 125
PITCH FIX field, and press the [ENTER] key.
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Correcting a Vocal Track (Pitch Fix) 5 Specify the record destination track in the TRACK field and the virtual track in the V.TR field, then move the cursor to the OK button and press the [ENTER] key. This will select the PITCH FIX display. B A D E C F NOTE • The following occur when the PITCH FIX mode is engaged: • No other display can be selected from the panel keys. • Record track assignments are ignored. • No internal effects other than Pitch fix can be accessed. • The Automix function is temporarily disabled. • MIDI program and control change messages cannot be received. 1 PITCH FIX field • EXIT button Move the cursor to this button and press [ENTER] to exit from the PITCH FIX mode and return to the Bounce page. • BYPASS button .........To monitor the vocal track prior to pitch correction, move the cursor to this button and press [ENTER]. B TRACK field • FROM TR Indicates the track to be edited (the source track). This field is only for display, and cannot be edited. • TO TR/TO V.TR ...........Indicates the track and virtual track to which the processed source track will be recorded (the destination track). This field is only for display, and cannot be edited. C CONTROL field Selects the method of pitch correction/shift from the three listed below. • SCALE Specify the scale via received MIDI notes to adjust the pitch. For example, if you play a chord on a connected MIDI keyboard, the pitch is shifted by the notes included in the chord. • NOTE The pitch is changed according to the received MIDI note. • PANEL This lets you adjust the pitch by specifying a scale from the keyboard on the display. D PARAMETERS field • TYPE Set this to an appropriate value to maximize the accuracy of the pitch correction. Generally this should be set to Normal, but for low-pitched vocals it might be preferable to use the Male setting, and for high-pitched vocals try the Female setting. • KEEP FORMANT button When this button is engaged the basic character (timbre) of the voice will not change when the pitch is corrected. • DETECT knob ..... Determines the pitch detection speed. The shorter the setting, the more quickly the pitch is detected allowing faster response. The longer the setting, the more slowly the pitch is detected which can result in abrupt, step-like pitch changes. • RATE knob .......... This determines the speed of pitch change. The faster the setting, the more quickly the pitch is changed so that pitch correction more accurately tracks the original signal. When this is set to "000," there is no pitch change. • PITCH knob ......... This determines the octave setting of the pitch-adjusted signal. The range is from -2 to 2 octaves in semitone steps. The integer and fraction segments of the value are set separately. • FORMANT knob.. This determines the vocal character (timbre) of the pitchadjusted signal. Positive (+) values result in a higher voice character and negative (-) values result in a deeper voice character. Effects 14 AW2400 Owner's Manual 125