Yamaha AW2400 Owner's Manual - Page 198
MIDI Synchronization Message Setup
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Basic MIDI Settings • MIDI Synchronization Message Setup F OTHER field MIDI messages other than program change and control change messages are set up here. • ECHO button (TX)........ Received MIDI messages other than program and control change are re-transmitted ("echoed") via the MIDI OUT/ THRU connector (or USB connector or digital I/O card output port). G REMOTE OUT box Selects the connector/port via which MIDI messages will be transmitted when the MIDI Remote function is active (when the REMOTE screen is showing). Refer to page 204 for details on the MIDI Remote function. NOTE • The same connector/port as selected in the PORT field or THRU box cannot be selected here. H THRU box Specifies the connector/port for "THRU" output of MIDI messages received via the MIDI IN connector (or USB connector or digital I/O card input port). If "MIDI" and "USB 1" are selected for the two THRU boxes, THRU output will be as follows: • Messages received at the MIDI IN connector will be THRU output via the USB output port 1. • Messages received at the USB input port 1 will be THRU output via the MIDI OUT/THRU connector. MIDI messages generated by the AW2400 itself are not transmitted via connectors/ports selected for THRU output. NOTE • The same connector/port cannot be specified for both boxes. • The same connector/port as selected in the PORT field or REMOTE OUT box cannot be selected here. MIDI Synchronization Message Setup The MIDI screen Setting 2 page allows selection of MIDI messages used for synchronization with external equipment (MTC and MIDI clock) as well as messages used for remote control. To call this page press the Work Navigate section [MIDI] key as many times as necessary, or press the [F2] key after pressing the [MIDI] key. C BA F GH IJ 20 D E K This page contains the following items. 1 MMC field Specifies how MMC will be transmitted/received. B MMC OFF button Engage this button (it will appear inverted) to disable MMC transmission and reception. C MMC MASTER button When this button is turned on the AW2400 functions as MMC master, and the appropriate MMC commands will be output via the MIDI OUT/THRU connector (or USB connector or digital I/O card output port) when the transport is operated. Turn this button on when you want to remotely control external equipment from the AW2400. D MMC SLAVE button When this button is turned on the AW2400 functions as MMC slave, and will respond to appropriate MMC commands received via the MIDI IN connector (or USB connector or digital I/O card input port). Turn this button on when you want to remotely control the AW2400 from external equipment. MIDI 198 AW2400 Owner's Manual