Yamaha AW2400 Owner's Manual - Page 254
REV->PAN, DELAY+ER., One input, two output reverb and autopan effects in parallel.
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
Effects Parameters ■ REV->PAN One input, two output reverb and autopan effects in parallel. Parameter REV TIME INI. DLY HI. RATIO DIFF. DENSITY HPF LPF REV.BAL FREQ. DEPTH DIR. WAVE Range 0.3-99.0 s 0.0-500.0 ms 0.1-1.0 0-10 0-100% THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU 0-100% 0.05-40.00 Hz 0-100% *1 Sine, Tri, Square Description Reverb time Initial delay before reverb begins High-frequency reverb time ratio Spread Reverb density High-pass filter cutoff frequency Low-pass filter cutoff frequency Reverb and panned reverb balance (0% = all panned reverb, 100% = all reverb) Modulation speed Modulation depth Panning direction Modulation waveform *1. LR, L->R, L
Effects Parameters
254
Appendix
AW2400
Owner’s Manual
■
REV->PAN
One input, two output reverb and autopan effects in parallel.
■
DELAY+ER.
One input, two output delay and early reflections effects in parallel.
Parameter
Range
Description
REV TIME
0.3–99.0 s
Reverb time
INI. DLY
0.0–500.0 ms
Initial delay before reverb begins
HI. RATIO
0.1–1.0
High-frequency reverb time ratio
DIFF.
0–10
Spread
DENSITY
0–100%
Reverb density
HPF
THRU, 21.2 Hz–8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz, THRU
Low-pass filter cutoff frequency
REV.BAL
0–100%
Reverb and panned reverb balance (0% = all panned reverb, 100% = all reverb)
FREQ.
0.05–40.00 Hz
Modulation speed
DEPTH
0–100%
Modulation depth
DIR.
*1
*1.
L<–>R, L–>R, L<–R, Turn L, Turn R
Panning direction
WAVE
Sine, Tri, Square
Modulation waveform
Parameter
Range
Description
DELAY L
0.0–1000.0 ms
Left channel delay time
DELAY R
0.0–1000.0 ms
Right channel delay time
FB. DLY
0.0–1000.0 ms
Feedback delay time
FB. GAIN
-99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback)
HI. RATIO
0.1–1.0
High-frequency feedback ratio
HPF
THRU, 21.2 Hz–8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz, THRU
Low-pass filter cutoff frequency
DLY/ER
0–100%
Delay and early reflections balance (0% = all delay, 100% = all early reflections)
TYPE
S-Hall, L-Hall, Random,
Revers, Plate, Spring
Type of early reflection simulation
ROOMSIZE
0.1–20.0
Reflection spacing
LIVENESS
0–10
Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY
0.0–500.0 ms
Initial delay before reverb begins
DIFF.
0–10
Spread
DENSITY
0–100%
Reverb density
ER NUM.
1–19
Number of early reflections