Yamaha AW2400 Owner's Manual - Page 119
Inserting an Effect Into a Channel
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Inserting an Effect Into a Channel Inserting an Effect Into a Channel Effects can be directly inserted into the signal path of specified channels as follows. 1 Referring to the instructions in "Recalling Effect Library settings" on page 116, recall an effect library preset that is based on the effect you want to use. 2 Call the CH VIEW screen View page by either pressing the Selected Channel section [VIEW] key as many times as necessary, or by pressing the [F1] key after pressing the [VIEW] key. The signal flow and mix parameters for each channel are displayed in this page. 3 Use the Layer section keys, [INPUT SEL] keys, [SEL] keys, or [STEREO SEL] key to select the channel into which the effect is to be inserted. The signal flow for the selected channel will be displayed. To insert an effect that is to be used on just one instrument connected to the AW2400, for example, insert the required effect into the appropriate input channel. The example diagram shows input channel 1 selected for effect insertion. INSERT EFF 4 Move the cursor to the field to the right of INSERT EFF on the display and press the [ENTER] key. A popup window allowing selection of the effect to be inserted as well as an I/O card channel to and from which the signal will be sent/received will appear. The popup window includes the following items. • NONE No effect inserted. • EFF1-4 Effect 1-4 inserted. NOTE • The same effect number can not be selected for multiple channels. • Inserted internal effects cannot be used with the effect sends and returns. • SLOT1-16 ....... Select one of these options to insert an external effect unit via an I/O card. If SLOT1 is selected, for example, Output channel 1 of the I/ O card is used to send the signal to the external effect processor, and input channel 1 of the same card is used to return the output from the external effect processor to the channel. HINT • When SLOT1-16 is selected for a stereo channel (stereo output or bus master), an odd-even channel pair ("SLOT 1-2" for example) will be assigned to the stereo channels and inserted. Effects 14 NOTE • Effects cannot be inserted into the effect send master or effect return channels. When an item other than NONE is selected, an abbreviation of the insert destination will appear to the right of the colon (" : "). The meanings of the abbreviations are as follows. Abbreviations Descriptions SEND Effect send/return operation (not inserted in (EFF1-4 only) any channel). IN1-IN16 Inserted in input channel 1-16. TR1-TR24 Inserted in track channel 1-24. STEREO Inserted in stereo output channel. BUS1-2 Inserted in bus master channel 1, 2. AUX1-4 Inserted in AUX send master channel 1-4. AW2400 Owner's Manual 119