Yamaha AW2400 Owner's Manual - Page 201
Switching AW2400 scenes from an external MIDI device, Assign scenes to program changes
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Connecting to External Equipment 8 Play back the external MIDI device. When you play back the external MIDI device, the corresponding MMC commands will be sent to the AW2400, and the AW2400 will begin running. At the same time, the AW2400 will transmit MTC to the external MIDI device, and the external MIDI device will run in synchronization with it. HINT • You can synchronize using MIDI Clock and Start/Stop/Continue messages instead of using MTC and MMC. For details on the settings used in this case, refer to "Recording/playing AW2400 mix operations on an external sequencer" (→ p. 202). Switching AW2400 scenes from an external MIDI device Here's how you can transmit program changes from an external MIDI device to switch scenes on the AW2400. ■ Assign scenes to program changes 1 In the Scene/Automix/USB section, use the [SCENE] key to access the SONG screen PGM Assign page. This page lets you assign a scene number to each program change number. C Scene Move the cursor to this area and use the [DATA/JOG] dial to select the scene that you want to assign to the corresponding program number. D INITIALIZE button Returns the program change assignments to their initial state. HINT • In the initial state Program change numbers 1-99 correspond to scenes 1-99, program change number 100 = Initial Data (all scene parameters in their initial state), and program change numbers 101-128 are "NO ASSIGN" (unassigned). 2 Move the cursor to the program change number, and use the [DATA/JOG] dial to select the program change number for which you want to change the assignment. HINT • The [INC]/[DEC] keys can also be used to select program change numbers. 3 Move the cursor to the scene in the list, and use the [DATA/JOG] dial to select the scene that you want to assign to the corresponding program change number. 4 Repeat steps 2-3 to assign the desired scenes to other program change numbers. HINT • The PGM Assign page settings apply to all songs. • If you want to reset the scene assignments to the initial set- ting, move the cursor to the INITIALIZE button and press the [ENTER] key. A B C D 1 List This lists the scenes of the current song. The line 20 enclosed by a dotted frame is the scene currently selected for operation. MIDI B Program change number This indicates the program change number (001-128). Move the cursor to this number and use the [DATA/ JOG] dial to scroll the list upward or downward. AW2400 Owner's Manual 201