Yamaha AW2400 Owner's Manual - Page 34
Press the SELECTED CHANNEL DYN], [AUX], responding parameters as required.
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Basic operation of the AW2400 2 Press the SELECTED CHANNEL section [DYN], [AUX], [EFFECT], or [PAN/EQ] key so that its indicator light, according to the parameters you want to control. With the default settings the screen corresponding to the pressed key will 2 appear automatically. The display will not change if the UTILITY screen Preference page AUTO DISPLAY button is set to OFF (→ p. 211). Introducing the AW2400 The parameters that can be controlled by the SELECTED CHANNEL knobs are as follows: Selected Key (Lit) Knob 1 Knob 2 [DYN] Multiple compressor parame- ters, or the last parameter operated, depending on the Compressor threshold. control status. [AUX] Send level from channel to AUX 1. Send level from channel to AUX 2. [EFFECT] Send level from channel to EFFECT 1. Send level from channel to EFFECT 2. [PAN/EQ] Pan Equalizer Q. Knob 3 Compressor ratio. Send level from channel to AUX 3. Send level from channel to EFFECT 3. Equalizer frequency. Knob 4 Compressor gain. Send level from channel to AUX 4. Send level from channel to EFFECT 4. Equalizer gain. HINT • After selecting a channel, press the SELECTED CHANNEL [VIEW] key to call the CH VIEW screen where you can edit the channel signal routing and all of the channel parameters. Refer to page 105 for details on the CH VIEW screen. NOTE • The parameter controlled by SELECTED CHANNEL knob 1 when the [DYN] key is engaged depends on the current operating status (→ p. 153). • If you operate SELECTED CHANNEL knob 1 immediately after recalling a setup from the compressor preset library, multiple compressor parameters will be adjusted simultaneously, changing the overall effect of the compressor (the type of change depends on the recalled preset library setup). • When individual compressor parameters for a channel have been adjusted via the DYNAMICS screen, the last parameter adjusted is assigned to SELECTED CHANNEL knob 1 (the last-adjusted parameter is individually retained for each channel). 3 Rotate SELECTED CHANNEL knobs 1-4 to adjust the corresponding parameters as required. If the UTILITY screen Preference page AUTO DISPLAY button is set to OFF, a popup window showing the corresponding parameter name and the value will appear while the knob is being operated. 34 AW2400 Owner's Manual