Yamaha AW2400 Owner's Manual - Page 121
Editing Effects
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Editing Effects Editing Effects The AW2400 internal effect parameters can be edited to create precisely the effect your music requires. 1 Referring to the instructions in "Recalling Effect Library settings" on page 116, recall an effect library preset that is based on the effect type you want to use. 2 Make sure that the Selected Channel section [EFFECT] key is engaged and its indicator is lit. 3 Make sure that the EFFECT screen selected in step 1 is showing. Selected Channel knobs 1-4 correspond to EFFECT screens 1-4. Press the appropriate knob to call the desired screen. 4 Press the Display section [F3] key to access and edit the effect parameters. The EFFECT screen FX Edit page will appear. This page contains the following items. A BC D E F 1 NAME Indicates the name of the currently selected effect. B TYPE Indicates the type of the currently selected effect. NOTE • You cannot change the effect type via this page. If you want to use a different type you will need to recall a library setting that uses the desired effect type. C MIX BALANCE field • BYPASS button............Switches effect bypass on/ off. • MIX BALANCE knob ....Sets the balance between the effect and direct signals. 0% produces direct sound only, while 100% produces effect sound only. D USED AS Indicates how this effect is being used. "EFF1"- "EFF4" indicate that the effect is internally connected to the mixer section via send/return. If the effect is inserted into a specific channel the name of the channel into which the effect is inserted will be shown (e.g., "INPUT 1"). E Level Meter Displays the effect input or output level. Select input (IN) or output (OUT) via the button above the meters. F Parameter page In this area you can edit the various effect parameters. The content and range of the parameters will depend on the currently selected effect type. 5 Move the cursor to the effect parameter that you want to edit, and use the [DATA/JOG] dial or [INC]/[DEC] keys to edit the value. Depending on the effect type, this area may be used to show multiple parameter pages. In this case repeatedly press the CURSOR [ ] key to access the parameter page that contains the parameter you want to edit. 6 To switch effect BYPASS on/off, move the cursor to the BYPASS button and press the [ENTER] key. HINT • Edited effect settings can be stored in the effect library (→ p. 123). Effects 14 AW2400 Owner's Manual 121