Yamaha AW2400 Owner's Manual - Page 187
COMMAND, Channel/Region, EXECUTE button, parameter to be edited, and press
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Command Editing Automix data In a Specified Region 1 PARAMETERS field The following parameters can be selected for editing. • FADER, CH ON, PAN, EQ buttons ...........Faders, Channel [ON] keys, pan, and EQ operations. • LIBRARY (CH, GATE, COMP, EQ) buttons ...........Channel library (CH), gate library (GATE), compressor library (COMP), and EQ library (EQ) recall. • SCENE button Scene recall. • EFF LIB 1-4 buttons .......Effect 1-4 library recall. • AUX/ON 1-4 buttons .......AUX 1-4 send level and on/off switching. • EFF/ON 1-4 buttons........Effect 1-4 send level and on/off switching. B COMMAND Displays the currently selected edit command. C Channel/Region The channel and region to which the edit command will apply are specified here. The display will change according to the command selected in B. HINT • The channel selection will be ignored when editing library, scene or effect settings. D EXECUTE button The selected edit command is executed when the cursor is moved to this button and the [ENTER] key is pressed. 2 Move the cursor to the button in the PARAMETERS field corresponding to the parameter to be edited, and press the [ENTER] key. Multiple parameters can be selected. 3 Move the cursor to the COMMAND field and use the [DATA/JOG] dial or the [INC]/[DEC] keys to select a command, then press the [ENTER] key. The following commands can be selected. • ERASE........ Erase all occurrences of the specified parameter(s) in the specified region. • COPY.......... Copy all occurrences of the specified parameter(s) in the specified region to the specified position in the specified destination channel. • MOVE.......... Move all occurrences of the specified parameter(s) in the specified region to the specified position in the specified destination channel. The original parameters will be erased. The display will change according to the selected edit command as follows. ● When the ERASE command is selected: B C A 1 The target channel can be selected from the following. • IN 1-16 ....... Input channels 1-16 • TR 1-24 ...... Track channels 1-24 • RTN 1-4...... Effect return channels 1-4 • BUS 1, 2 ..... Bus master channels 1, 2 • AUX 1-4...... AUX send master channels 1-4 • EFF 1-4 ...... Effect send master channels 1-4 • ST Stereo output channel • ALL All channels B The start point of the region to be edited is specified in counter format. C The end point of the region to be edited is specified in counter format. ● When the COPY or MOVE command is selected: A B C D E 1 Specifies the source channel for the copy or move operation. The channels that can be selected are the same as for ERASE, above. B The start point of the source region for the copy or move operation specified in counter format. C The end point of the source region for the copy or move operation is specified in counter format. D Specifies the destination channel for the copy or move operation. Depending on the source channel for copy or move operation, the channels that can be selected vary. E The start point of the destination region for the copy or move operation specified in counter format. Automix 19 AW2400 Owner's Manual 187