Yamaha AW2400 Owner's Manual - Page 209
Utility functions, Using the test tone oscillator,
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Chapter 21 Utility functions This chapter explains the AW2400's various utility functions. Using the test tone oscillator The Oscillator page of the UTILITY screen lets you send the signal of the AW2400's built-in test oscillator to the desired bus. To call this page press the Work Navigate section [UTILITY] as many times as necessary, or press the [F1] key after pressing the [UTILITY] key. A H D E F G BC This page contains the following items. 1 OSC ON button When you turn this button on, the oscillator output will immediately be sent to the specified bus. Use the D-G buttons to specify the bus to which the signal will be sent. HINT • Pressing the [F1] key while holding the Display section [SHIFT] key has the same affect as the OSC ON button. B LEVEL knob Adjusts the output level of the oscillator. NOTE • Be sure to lower the setting of the LEVEL knob before turning on the oscillator to prevent sudden high-volume output. C WAVEFORM Selects one of the following oscillator signals. • 100Hz button 100 Hz sine wave • 1kHz button 1 kHz sine wave • 10kHz button 10 kHz sine wave • PINK NOISE button ........ Pink noise • BURST NOISE button..... Burst noise (20-millisecond pink-noise bursts as 4-second intervals) D BUS1 L/R, BUS2 L/R buttons Sends the oscillator output to the Bus 1 L/R or Bus 2 L/R. E AUX1-4 buttons Send the oscillator output to AUX buses 1-4. F EFFECT1-4 buttons Send the oscillator output to effect buses 1-4. G STEREO L/R buttons Sends the oscillator output to the stereo bus. H Level Meter Displays the BUS 1-2, AUX 1-4, and EFFECT BUS 1-4 output levels. NOTE • Sine waves and white noise have a higher actual sound pressure level than perceived by the ear, and may damage your speakers if played at a high volume. Please use caution. 21 Utility functions AW2400 Owner's Manual 209