Yamaha AW2400 Owner's Manual - Page 81
When you've finished the bounce opera, return the counter display to zero, and then
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
10 Move the cursor to the POST FADER button, and press the [ENTER] key. The post-fader signal levels will be displayed. If the level meter reaches the "OVER" position, press the Layer section [MASTER] key to make it light (the MASTER mixing layer is selected), and lower fader 1 (Bus 1) and fader 2 (Bus 2). NOTE • All of the current patch settings will be erased if you switch the RECORD screen page after making signal assignments. (A popup window will ask you whether you really want to erase the assignments.) Be careful not to switch the RECORD screen page until you've finished recording. 11 To stop bounce-recording, press the STOP [■] key. 12 To hear the bounce-recorded results from the beginning, press the RTZ [ ] key to return the counter display to zero, and then press the PLAY [ ] key. When playing back the bounce-destination tracks, be careful not to switch the RECORD screen to a page other than the Bounce page or to defeat the bounce settings. If you do so, the connection from the bounce-source track channels to the stereo bus will automatically be restored. This will cause the bounce-source and bounce-destination signals to be duplicated. HINT • If desired, you can use the [UNDO/REDO] key to cancel the bounce-recording operation (→ p. 64), or switch the virtual track of the bounce-destination and record another take (→ p. 63). 13 When you've finished the bounce operation, press the Quick Navigation section [RECORD] key once again, move the cursor to the SAFE button in the screen, and press the [ENTER] key. A popup message will ask you for confirmation. Move the cursor to the OK button and press the [ENTER] key to defeat all bounce settings. Bounce (ping-pong) recording procedure 8 Mixdown and bounce operations AW2400 Owner's Manual 81