Yamaha AW2400 Owner's Manual - Page 21

Parts of the AW2400 and what they do ■ Analog Input section Introducing the AW2400 1 2 2 C 1 [GAIN] knobs 1-8 These adjust the sensitivity of the rear panel MIC/LINE INPUT jacks 1-8 to input signals. B [PEAK] Indicators These indicators will light red if the peak signal level after the [GAIN] knob reaches or exceeds 3-dB below clipping. To set the optimum record level, set the [GAIN] knob so that the indicator flashes only briefly on the highest peaks that will be encountered during the recording. C [INPUT SEL] keys 1-8 These keys select the mixer input channel that you will operate. ■ Work Navigate section 1 2 3 4 5 6 G H 1 [SONG] key This key accesses the SONG screen, where you can save or load songs, and perform the shut-down procedure. B [CD] key This key accesses the CD screen, where you can write or play an audio CD, and backup or restore data. C [TRACK] key This key accesses the TRACK screen, where you can check whether each track contains data, and switch the virtual tracks that will be used for recording and playback. D [EDIT] key This key accesses the EDIT screen, where you can copy or erase tracks. E [MIDI] key Accesses the MIDI screen where you can set up MIDI synchronization, scene change, and other settings. F [UTILITY] key Press this key to access the UTILITY screen with settings for the unit's test tone oscillator, digital inputs and outputs, and other utility parameters. G [PATCH] key Accesses the PATCH screen where you can patch output signals as required. H [DIO] key The [DIO] key accesses the DIO screen which includes the clock source and I/O card settings. ■ Quick Navigate section 1 2 1 [RECORD] key This key accesses the RECORD screen, where you can quickly assign the signal to be recorded to the input of each track, and make settings for recording. B [MONITOR] key The MONITOR screen, accessed by this key, includes settings for fader grouping, the solo function, and more. AW2400 Owner's Manual 21