Ricoh Aficio SP 3400SF User Guide - Page 135
Start, Clear/Stop, Reduce/Enlarge, Duplex, Auto Clear, Press the, Within 30 seconds
View all Ricoh Aficio SP 3400SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Combining Multiple Pages Place the original in the center of the A5/Half Letter scan area. BSP100S D Press the {Start} key. A message prompting you to place the original back side down on the expo- 4 sure glass appears on the display. E Within 30 seconds, place the original back side down and top to the ma- chine rear on the exposure glass, and then press the {Start} key again. Note ❒ Use the following keys to cancel settings: • { }: Cancels the changes made to settings and returns the display to the previous screen. • {Clear/Stop}: Cancels the changes made to settings and returns the display to the initial screen. ❒ If you do not copy the back side within 30 seconds after copying the front side, the job will be canceled. ❒ Regardless of the machine's reduction or enlargement ratio setting, an ID card copy will always be made at 100%. ❒ You can change the machine's default [Reduce/Enlarge] setting to always make photocopies in ID card copy mode. ❒ Setting this function for the current job temporarily disables the [Duplex Copy] setting automatically. However, after the temporary job setting is cleared, the duplex copy function will be enabled again automatically. ❒ Temporary job settings are cleared in the following cases: • When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed. • When the {Clear/Stop} key is pressed while the initial screen is displayed. • When the machine's mode is changed. • When the power is turned off. Reference For details about [Reduce/Enlarge], see p.202 "Copy Settings". For details about [Auto Clear], see p.233 "Administrator Settings". 125