Ricoh Aficio SP 3400SF User Guide - Page 158
Specifying the scanning size according to the size of the original
View all Ricoh Aficio SP 3400SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Using the Scanner Function ❒ If you specify the last used destination, the preset scan settings become effective again, even if you have changed the settings for the previous job. Specifying the scanning size according to the size of the original This section describes how to specify the scanning size according to the size of the current original. A Press the {Reduce/Enlarge} key. 5 BSP093S B Press the {Reduce/Enlarge} key or {U}{T} keys to select the size of the orig- inal, and then press the {OK} key. If you selected anything other than [Custom], you do not need to perform the remaining steps of the procedure. C Press the {U}{T} keys to select [mm] or [Inch], and then press the {OK} key. D Enter the horizontal value using the number keys, and then press the {OK} key. You can press the {U}{T} keys to change the value in 1 mm or 0.1 inch increments. E Enter the vertical value using the number keys, and then press the {OK} key. You can press the {U}{T} keys to change the value in 1 mm or 0.1 inch increments. Note ❒ Use the following keys to cancel settings: • { }: Cancels the changes made to settings and returns the display to the previous screen. • {Clear/Stop}: Cancels the changes made to settings and returns the display to the initial screen. ❒ You can change the machine's default [Document Size] setting to always scan originals with a specific scanning size. ❒ Temporary job settings are cleared in the following cases: • When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed. • When the {Clear/Stop} key is pressed while the initial screen is displayed. 148