Ricoh Aficio SP 3400SF User Guide - Page 159
Adjusting image density, Document Size, Auto Clear, Density, Clear/Stop
View all Ricoh Aficio SP 3400SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Scanning Using the Control Panel • When the machine's mode is changed. • When the power is turned off. • When the machine's default for the same setting is changed. Reference For details about [Document Size], see p.207 "Scanner Settings". For details about [Auto Clear], see p.233 "Administrator Settings". Adjusting image density This section describes how to adjust image density for the current job. There are five image density levels. The higher the density level, the darker the scanned image. A Press the {Density} key. 5 BSP106S B Press the {Density} key or {U}{T} keys to select the desired density level, and then press the {OK} key. Note ❒ Press the { } key or {Clear/Stop} key to discard the current change and return to the initial screen. ❒ You can change the machine's default [Density] setting to always scan with a specific density level. ❒ Temporary job settings are cleared in the following cases: • When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed. • When the {Clear/Stop} key is pressed while the initial screen is displayed. • When the machine's mode is changed. • When the power is turned off. • When the machine's default for the same setting is changed. Reference For details about [Density], see p.207 "Scanner Settings". 149