Ricoh Aficio SP 3400SF User Guide - Page 179

Sending a Fax B Place the original on the exposure glass or in the ADF. If necessary, configure the advanced scan settings. C Enter the fax number (up to 40 characters) using the number keys. D Press the {Start} key. BSP089S When using the exposure glass in Memory Transmission mode, you will be prompted to place another original. In this case, proceed to the next step. E If you have more originals to scan, press {1} within 60 seconds, place the next original on the exposure glass, and then press the {OK} key. Repeat 6 this step until all originals are scanned. If you do not press {1} within 60 seconds, the machine will start to dial the destination. F When all originals have been scanned, press {2} to start sending the fax. Note ❒ A fax number can contain 0 to 9, pause, "p", "q", and space. ❒ If necessary, insert a pause in a fax number. The machine pauses briefly before it dials the digits following the pause. You can specify the length of the pause time in the [Pause Key Time] setting under fax transmission settings. ❒ To use tone services on a pulse-dialing line, insert "p" in a fax number. "p" switches the dialing mode from pulse to tone temporarily. ❒ You can also specify a destination using the One Touch buttons, Speed Dial function, or {Pause/Redial} key. In addition, you can specify multiple destinations and broadcast the fax you are sending. ❒ When in Memory Transmission mode, you can enable the [Auto Redial] setting under fax transmission settings to set the machine to automatically redial the destination if the line is busy or an error occurs during transmission. ❒ When in Memory Transmission mode, the machine's memory may become full while scanning the originals. In this case, the screen prompts you to cancel the transmission or to send only the pages that have been scanned successfully. 169