HP 9500hdn HP Color LaserJet 9500n/9500hdn - User Reference Guide - Page 244

Interpreting control panel messages Message ACCESS DENIED MENUS LOCKED BAD DUPLEXER CONNECTION FULL CANCELING... CHECKING PAPER PATH CHECKING PRINTER CHOSEN PERSONALITY NOT AVAILABLE alternates with READY CLEAN POST CHARGER CLEARING PAPER PATH CLOSE FRONT OR LEFT DOOR CLOSE LOWER RIGHT DOOR DETECTABLE SIZE IN TRAY X RECOMMEND MOVE SWITCH TO STANDARD Description or explanation Recommended action The printer control panel function that you are trying to gain access to has been locked to prevent unauthorized access. See your network administrator. The duplexer is not connected properly to the printer. Turn the printer off and reinstall the duplexer. Turn the printer on. The standard, left, optional 1, or Empty the bin to continue optional 2 output bin is full. printing. The printer is canceling a job. The message continues while the job is stopped, the paper path is flushed, and any remaining incoming data on the active data channel is received and discarded. No action necessary. The engine is rotating its rollers No action necessary. to check for possible jams and to clear them automatically. The engine is performing an internal test. No action necessary. A print job requested a printer language (personality) that is not available with this printer. The job will not print and will be cleared from memory. Print the job using a printer driver for a different printer language, or add the requested language to the printer (if available). The post charger requires cleaning. Clean the post charger. See "Cleaning the post charger" on page 205. The printer jammed or the printer was turned on and media was detected in a wrong location. The printer is automatically attempting to eject the pages. No action necessary. The front or left doors are open. Close the doors to continue printing. The lower right door is open. Close the lower right door to continue printing. A tray is loaded with standard size media, and the switch in the tray is set to custom. 1 Move the switch to the "standard" position. 2 Confirm that the media guides are resting against the media. 242 Understanding printer messages ENWW