HP 9500hdn HP Color LaserJet 9500n/9500hdn - User Reference Guide - Page 35
To load media in tray 1, first side to be printed should be down.
UPC - 808736429689
View all HP 9500hdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
1 To load media in tray 1 Tray 1 is a multipurpose tray that holds a stack of media up to 5 mm (0.2 inch) in height, which equals approximately 100 sheets of 20-lb paper, 10 envelopes, or 20 transparencies. (See "Supported media sizes for input and output" on page 97.) If media is loaded in tray 1, the printer default is to print media from tray 1 first. 2 Tray 1 provides a convenient way to print envelopes, transparencies, custom-size paper, or other types of media without having to unload the other trays. It can also be used as a convenient additional input tray. 2 1 CAUTION To avoid a jam, never add or remove paper from the tray while printing from that tray. 3 1 Open tray 1. 2 Pull out the first tray extension (1) until it stops. If you are printing on large media, also rotate the second tray extension (2) out until it stops. 3 Load media according to size. For single-sided printing, the side to be printed should be up. For double-sided printing, the 4 first side to be printed should be down. 4 Slide the paper width guides to the appropriate size that is marked on the tray. Note By default, tray 1 size is set to ANYSIZE in the control panel. This means that, unless a different tray is specified in the printer driver or software application, any job prints from tray 1 first if media is loaded in the tray. Tray 1 is intended for specialized use. See "Customizing the operation of tray 1" on page 139. 1 Printer setup 33