HP 9500hdn HP Color LaserJet 9500n/9500hdn - User Reference Guide - Page 85

Note Orienting media Orient media types and sizes according to the tray from which the media will be printed and according to whether the media will be duplexed (printed on both sides). Knowing whether the media will be duplexed is especially important when printing on letterhead, single-side glossy, or preprinted media. The following table shows the orientation of media. Please note the special consideration given to prepunched paper (see page 85). Media orientation works in conjunction with media type. Make sure to set the correct type for the media you are using. For more information, see "Supported types of media" on page 88. Table 1. Orienting media Media Tray Standard sizes other 1 than A4 or letter, and custom sizes, long edge up to 306 mm (12 inches) (weights up to 220 g/m2) (58-lb bond) Duplex Orientation No Long edge toward the printer; top of page toward the rear of the printer; side to be printed facing up. Note. The short edge must be at least 191 mm (7.5 inches). Standard (such as 1 letter and A4) and custom sizes, long edge up to 306 mm (12 inches) (weights up to 220 g/m2) (58-lb bond) Standard sizes that commonly use this orientation are letter and A4. Yes Long edge toward the printer; top of page toward the rear of the printer; first side to be printed facing down. 3 Selecting and using media 83