HP 9500hdn HP Color LaserJet 9500n/9500hdn - User Reference Guide - Page 31

Step 13. Load media in the input trays 1 To load media in tray 2 and tray 3 This procedure is for loading A4- or letter-size media. If you are using media that is lighter or heavier than 75 g/m2 to 105 g/m2 (20 to 28 lb), or if you are using coated media or transparencies, set the media type for the tray. To set the media type for the tray or to use other sizes of media, see "Recommended media" on page 89. 2 CAUTION To avoid a jam, never add or remove media from the tray while printing from that tray. 1 Pull the tray open until it stops. 2 Load the media so that the top edge of the media is toward the rear of the tray. For single-sided printing, the side to be 3 printed should be down. For double-sided printing, the first side to be printed should be up. CAUTION Do not load more media than the maximum that is indicated by the media-fill triangles at the back of the tray. It is usually not necessary to fan media before loading it. 4 3 Move the left media guide to match the media size that is being loaded. 4 Move the front media guide to match the media size that is being loaded. 1 Printer setup 29